To achieve the superior performance requirements of a complete Gypelite system, a range of superior quality accessories available. We deliver the best tested and tried products that adhere to stringent quality standards as well as our own rigorous product performance assessment.
In order to get the best results, ensure you use only specifically designed Gypelite accessories for your project.
Mechanically galvanized to prevent corrosion.
Advantages
- Ring head - Reduces occurrence of paper tearing.
- Dual thread convenience - One screw type for steel and timber.
- Flat top screws.
- Laminating Screws.
Needle point screws (Ring head)
| Description | Thread | Type | Qty per box |
|---|---|---|---|
| 6g x 30mm | Hi-Lo | Collated | 1000 |
| 6g x 30mm | Hi-Lo | Loose | 1000 |
| 7g x 40mm | Hi-Lo | Collated | 1000 |
| 7g x 40mm | Hi-Lo | Loose | 1000 |
| 8g x 50mm | Hi-Lo | Loose | 500 |
Drill point screws (Ring head)
| Description | Thread | Type | Qty per box |
|---|---|---|---|
| 6g x 30mm | Fine | Collated | 1000 |
| 6g x 30mm | Fine | Loose | 1000 |
| 6g x 30mm | Fine | Loose | 1000 |
| 6g x 30mm | Fine | Collated | 1000 |
| 7g x 50mm | Fine | Loose | 500 |
| 8g x 65mm | Fine | Loose | 500 |
Flat to screws
| Description | Thread | Type | Qty per box |
|---|---|---|---|
| 10g x 16mm drill point flat top screw | Fine | Loose | 1000 |
Laminating screws
| Description | Thread | Type | Qty per box |
|---|---|---|---|
| 10g x 40mm Needle point bugle ring head laminating screw | Coarse | Loose | 1000 |
Corner Tapes
Perforated cross fiber paper tapes with center crease line. They are in white color and are reinforced with rust resistant steel strips. Corner tapes are used to protect external corner joints.
100 MM Tapes
Glass fiber tapes with an alkali resistant coating. They are used to reinforce joints in ceilings and exterior walls. Width-100mm Length-50mm.
Waterproof Flashing Tapes
Durable and highly flexible flashing tapes made up of polyester fabric with central elastic strip. Width-120mm Length-10mm.
Waterproof Corner Flashing Tape
A3 way water proof flashing tape particularly for corners. 1 piece per pack.
Paper Tapes
Perforated cross fiber paper tapes with center crease line. They are white in color and they work perfectly in reinforcing paper board joints.
REINFORCING MESH
Made up of glass fiber. Gypelite reinforcing mesh is used to reinforce the skim and also the base coat. Width-1mm Length-50mm.
Galvanized metal c shaped stud used with U channel to provide steel frames for gypsum board partitions and wall linings.
C STUD
Galvanized metal U shaped channel used with C stud to provide steel frames for gypsum board partitions.
U Channel
Lightweight steel sections used for starter studs, intersections, door openings and end studs.
E Stud
Galvanized metal I shaped section used with U channels to provide a metal frame for gypsum board wall linings.
I Stud
Light weight non-load bearing steel sections which are installed between boards and provide the bearing surface to which gypsum board is applied.
CH Stud
Galvanized metal flat strap used in 3000 partitions, wall linings and ceilings to provide support for gypsum board joints.
Flat Strap
Lightweight steel sections positioned on floor and ceiling to accommodate CH and E studs.
J Channel
Lightweight steel clips friction fitted to flanges of structural steelwork in the column and beam clip system.
CB Clips
Metal supports used with metal framing to hold mineral wool insulation in place.
Insulation Hold Strap
Galvanized metal fixing channel used in partitions to provide and support for gypsum board joints and heavy fixtures also provide a fire stop.
Fixing Channel
Galvanized steel section designed to allow the easy construction of curved partitions and wall linings.
Flex Track
A sound and vibration isolating strengthening brace for twin walls and partitions.
V Brace Bar
Galvanized steel section designed to increase acoustic performance of partitions.
Resilient Bar
Galvanized metal U shaped channel used with C stud to provide steel frames for gypsum board partitions and wall linings that require a deflection head allowance or exceed 42m in height.
Flange U Channel